Solar Plant Service

Making sure your home solar electric or photovoltaic (PV) system is sized, sited, installed, and maintained correctly is essential for maximizing its energy performance. When installing a PV system, consider:

  • How much sun you have (solar resource)
  • How big the system needs to be to meet your electricity needs
  • Where the system will be located and how much room it needs (system siting)
  • Whether you want your system to be connected to the grid or not
  • What needs to be done to ensure that the system is safe

It is always a good idea to get more than one bid for the installation of your PV system. Make sure that all bids are made on the same basis. For example, a bid for a system mounted on the ground is usually very different from another bid for a rooftop system.

Similarly, some PV modules  generate more electricity per square foot than others. Bids should clearly state the maximum generating capacity of the system -- measured in Watts (W) or kilowatts (kW). If possible, have the bids specify the system capacity in "AC Watts" (alternating current) under a standard set of test conditions, or specify the output of the system at the inverter. Also request an estimate of the amount of energy that the system will produce on an annual basis (measured in kilowatt-hours).

Because the amount of energy depends on the amount of sunlight -- which varies by location, season, and year to year -- it's unlikely the contractor will quote a specific figure, but a range of 20% is realistic. Bids also should include the total cost of getting the PV system up and running, including hardware, installation, connection to the grid, permitting, sales tax, and warranty.

Your warranty is also a very important factor for evaluating bids. A solar rebate program may require that systems be covered by a two-year parts-and-labor written installation warranty, for example, in addition to any manufacturers' warranties on specific components (including inverter and module warranties). The installer may offer longer warranties. Also ask yourself, "Will this company stand behind the full-system warranty for the next two years?"

MAINTAINING YOUR HOME SOLAR ELECTRIC SYSTEM

As with any mechanical or electrical appliance, PV systems require routine, periodic maintenance. System components may also need repair or replacement from time to time.

An efficient and long-lasting system will depend on a periodic check of system components and completion of any preventive maintenance as necessary. Talk with your system installer about routine and periodic maintenance. In the event of a system malfunction, effective troubleshooting and repair is necessary.

You may be able to carry out many routine inspections and maintenance tasks yourself. If, however, you are not the do-it-yourself type, or if there is a major problem with your system, you will need to locate a professional to do the work.

SIZING YOUR HOME SOLAR ELECTRIC SYSTEM

Accurately sizing the components of your solar electric or PV system helps ensure that your system will produce the amount of power you want it to produce. This is especially important for stand-alone systems, which are not connected to the electricity grid. Because PV is modular, you can always add to your solar energy collector should you need more power down the road.

First, consider what portion of your current electricity needs you would like your PV system to meet. For example, suppose that you would like to meet a certain percentage of your electricity needs with your PV system. You could work with your PV provider to examine past electric bills and determine the size of the PV system needed to achieve that goal. You can contact your utility company and request the total electricity usage, measured in kilowatt-hours, for your household or business over the past 12 months or consult your electric bills if you save them.

If you reduce your electricity loads, you can generally buy a smaller, less expensive PV system.

In addition to how much electricity you'd like to generate, the size of your system also depends on these factors:

  • The site's solar resource or available sunlight
  • The system's orientation and tilt
  • The system's efficiency at converting sunlight to electricity
  • Other electricity sources, like a utility, a wind turbine, or a fossil fuel generator

PV systems are classified by their rated power output (the peak power they produce when exposed to solar radiation of 1,000 Watts per square meter at a module temperature of 25°C). Systems rated between 1 and 5 kilowatts are generally sufficient to meet most of the needs of home and small business owners.

The table below provides an estimate of the roof area needed for several systems. Your system supplier/installer can make, or help you make, more precise calculations at your site before you purchase a system.

Roof Area Needed in Square Feet

 

PV Module Efficiency (%)

PV Capacity Rating (Watts)

2

100

250

500

1,000

2,000

4,000

10,000

4

30

75

150

300

600

1,200

3,000

8

15

38

75

150

300

600

1,500

12

10

25

50

100

200

400

1,000

16

8

20

40

80

160

320

800

 

For example, to generate 2,000 Watts from a 12%-efficient system, you need 200 square feet of roof area.

 

Get IN Touch

Kaushal Electrical & Engineering
RZG-807,Netaji Subhash Chand Marg,
Raj Nagar II, Palam, New Delhi - 110077
Mob: +91-7042528671, +91-8010072324
© 2016 - Kaushal Electrical & Engineering
Developed and Designed By: Beavers Technologies